Dynomotion

Group: DynoMotion Message: 12027 From: mp.3333 Date: 7/31/2015
Subject: LeadShine HSB57

Tom, do you have any experience with this older model?  The HBS57 drive spec shows >50us for direction setup time.  But the new LeadShine drives have dropped this spec to >5us.


If this >50usec spec is accurate, is there any way to config KFLOP to work with this older drive?


Thanks, Mike
Group: DynoMotion Message: 12028 From: Colin Fera Date: 7/31/2015
Subject: Re: LeadShine HSB57
Maybe cw\ccw?

Sent from my iPhone

On Jul 31, 2015, at 9:08, "mp.3333@... [DynoMotion]" <DynoMotion@yahoogroups.com> wrote:

 

Tom, do you have any experience with this older model?  The HBS57 drive spec shows >50us for direction setup time.  But the new LeadShine drives have dropped this spec to >5us.


If this >50usec spec is accurate, is there any way to config KFLOP to work with this older drive?


Thanks, Mike
Group: DynoMotion Message: 12029 From: Tom Kerekes Date: 7/31/2015
Subject: Re: LeadShine HSB57
Hi Mike,

I Googled and found his spec:

Which seems to indicate 5us Direction Setup Time.  Where did you find 50us?

KFLOP can not provide 50us setup time.

It doesn't seem to support cw/ccw pulses but if it would that would be a solution.

Regards
TK



Group: DynoMotion Message: 12031 From: mp.3333 Date: 7/31/2015
Subject: Re: LeadShine HSB57

Tom, I found >50us setup time in the hardware manual.


Search for "leadshine hbs57 manual", 2nd link shown on a googledrive, page 15 on pdf.  Maybe this is a misprint because the specs do not match.  I guess I will have to test.


Thanks, Mike
Group: DynoMotion Message: 12032 From: Tom Kerekes Date: 7/31/2015
Subject: Re: LeadShine HSB57
Hi Mike,

Seems to clearly show 50us.

Page 9 shows a software option for cw/ccw mode.  Do you have that?

Regards
TK


Group: DynoMotion Message: 12033 From: mp.3333 Date: 7/31/2015
Subject: Re: LeadShine HSB57

Tom, yes, I see that but do not have the software to change.  I will see if I can locate it.


It is odd that the other spec sheet is 5usec and also the new drives show 5usec...so was hoping it was a misprint in the manual.


Thanks, Mike
Group: DynoMotion Message: 12042 From: sanguit85 Date: 8/1/2015
Subject: Re: LeadShine HSB57
Attachments :
Hi Mike
I have Leadshine HBS507 (a newer version of HBS57) - it works like a charm with Kflop, even with default settings (I mean I didn`t even change Kflop direction setup time to 5.7ms). I`ve seen that page in google docs manual, it seems like they do have misprint (in fact, I found many mistakes in several Leadshine manuals, not so critical, but they were there). My guess is they mixed direction setup time with direction delay time up and printed the same value (see attachment)

Best regards, Alex
   @@attachment@@
Group: DynoMotion Message: 12043 From: mp.3333 Date: 8/1/2015
Subject: Re: LeadShine HSB57

Alex, thanks.  I will give it a try.


Mike